John Deer Disc wheel

[YoungBuckTX]

This tire came of our old set of JD discs. I don't have any experience with wheel bearings.... Can this be fixed?
I called our local JD shop and they said they couldn't find a replacement.

Thanks in advance for any help

20221011_153958.jpg

20221011_154006.jpg

20221011_154023.jpg

[bbhntr48]

Take the bearing to a NAPA and have them match them up

[BigBrother]

Take the bearing to a NAPA and have them match them up

this.

[HT]

get the size and search online. Replaced a bearing off a old 3pt hitch rototill that NAPA wanted $225 dollars for. Found it online for $65. Also, check with Agri Supply if you're close to one.

[Rem11-87]

What model disc is it?

[Duck cutter]

You will most likely need a puller to get that bottom piece off

[turbo]

You will most likely need a puller to get that bottom piece off

Heat it first.

It's galded on there.

[Duck cutter]

Heat it first.

It's galded on there.

I’ve pulled a good many off with just a puller

But yes, I’ve had to put the red wrench on some as well

[Gunning Bird]

Harv?

[DJP]

Another source is: https://www.germanbliss.com/

It sounds like a porn site, but it is actually a great source for tractor parts.

[YoungBuckTX]

Great info. Thanks a lot fellas. I couldn't find a PN on the disc

20221125_144808-01.jpg

[Chuck the Duck Slayer]

While youre at it might as well change the other side as well.

[Rem11-87]

Looks like a john deere RWA. Go to jdparts.com and get numbers off diagram and then search and see if you can find them cheaper.


https://partscatalog.deere.com/jdrc/...pFUVVJUE1FTlRd

[goosebegone]

Clean up the spindle too unless you like replacing bearings

[Quackhead22]

Not sure where you are located but if you are within an hour or so of Florence take the other side off and take the good bearing to Agri Supply. Go to the back of the store and find the tall fella wearing a cowboy hat and ask him.


Sent from my iPhone using Tapatalk

[Quackhead22]

And trust me when I tell you there are not many John Deere parts counter folks that are worth damn. About the only one worth dealing with is Blanchard Equipment in St Matthews


Sent from my iPhone using Tapatalk

[CUduckreeper]

Not sure where you are located but if you are within an hour or so of Florence take the other side off and take the good bearing to Agri Supply. Go to the back of the store and find the tall fella wearing a cowboy hat and ask him.


Sent from my iPhone using Tapatalk

Bruce is who you want to ask for.

[Smilee]

Measure it and then order from thebigbearingstore.com online. Quality bearings at best prices you will find. They have drawings of the bearings and critical dimensions.

[Catdaddy]

Not sure where you are located but if you are within an hour or so of Florence take the other side off and take the good bearing to Agri Supply. Go to the back of the store and find the tall fella wearing a cowboy hat and ask him.


Sent from my iPhone using Tapatalk

Yep,....Bruce knows his stuff.

Sent from my moto z4 using Tapatalk

[YoungBuckTX]

Looks like a john deere RWA. Go to jdparts.com and get numbers off diagram and then search and see if you can find them cheaper.


https://partscatalog.deere.com/jdrc/...pFUVVJUE1FTlRd

This appears to be it. So far I have been able to find everything I need using their part numbers on ebay. The farm is just up the road from Florence, so I will also visit Ag Supply. I appreciate it guys!