Exhaust fan electrical help

[VaTransplantDuckHunter]

Took pictures of how it was wired before but power was out and couldn’t tell wire colors.

[VaTransplantDuckHunter]

Two separate wires and wired to a three switch on wall.

From the ceiling , two whites, two backs and a red.

Fan has 3 whites, red, blue, black and a ground.

Any advice ?

[Saltydog235]

Blue to red
Black to black
White all together
Ground to ground

Blue and black are your hots

If you have three switches to a fart fan on the wall, you probably had a heater in it too. Change it to two or stacked switch. Or just abandon the heater.

[VaTransplantDuckHunter]

Salty I forgot to mention , it’s a heater, exhaust and light combo. My wife likes to scald in the shower then bake when she is drying off. Thanks for your help !

[2thDoc]

nothing better than a shower/wake and bake

[turbo]

nothing better than a shower/wake and bake

Pah-reach, big dawg.

[VaTransplantDuckHunter]

IMG_1087.jpg
IMG_1086.jpg
IMG_1086.jpg

[turbo]

Salty nailed it.

If you wire nut those ends, you can work the switches and test with a meter to neutral (white) each of the blacks and the red to figure out which switch is which.

Then, just like Salty said, wire it up based on his color code (standard).

I'm surprised to see no bare ground with what seems like Romex coming into that bracket. So, I'm nearly certain one of your whites coming out of that ceiling is being used as a ground. I'd have taped it green if it were me.

Need to figure out the ground or add one from a nearby fixture.

[Glenn]

nothing better than a shower/wake and bake

Pah-reach, big dawg.

dopers

[Tater]

No shit

[Saltydog235]

IMG_1087.jpg
IMG_1086.jpg
IMG_1086.jpg

Fan is Black
Heater is Red
Light is Blue IIRC

Fan and Light doesn't matter which black it hooks to on your black Romex (Switch Side). Hook red to red, typically the heater. Wire all neutrals together, grounds together.

[VaTransplantDuckHunter]

It’s working thanks for the help !

[2thDoc]

your wife got the munchies yet?