Or you can add hydro steering
I don't have any pics but here's what a simple google search can do. It's really simple, and a whole lot cheaper than hydro steering.
vrpmis.jpg
Yea I have a lot of picture just not sure how to post
Yes I need to do that then!! Thanks a lot! How does the hydro steer work?
Just making sure I am correct but this is a pad hull Havoc?
If so why would you run a clever style prop? You need a prop with a lot of rake and cup so it will carry the bow of the boat.
Dont get me wrong though 57mph is some dang good speeds but the videos I saw of it on fb looks like the bow is not lifting really well.
It's not your average pad as you would think. And it does lift well and I do agree it needs more bow lift. But we are still in the trials of props and working them. I also trimmed down the closer I got to video camera boat to make sure I could pass by him safely.
post a picture of the pad I am interested to see what Tim did with it. Is is similar to a hancock hull or xpress hyperlift?
Nope. If its close to any it will be hyperlift.
Don't know how to post a pic but its slanted on sides sharp and like 20 inches not as sharp. If you understand that. Almost a hyperlift
Where's this said video?
I would try a raker or chopper style prop. I ran a turbo lightning prop worked over by Mark Croxton on my old hyperlift. With the prop in its stock form it had really bad tiller torque. After Mark worked on it there was very little torque.
I'd talk to Ron Hill again and tell him how your cleaver is doing. Ask about one of his high rake semicleavers or a texas cut cleaver.
I have a loaner turbo and those pics above is with a 18 chopper. A pad is suppose to lift by its engineering design. And this one doesnt have the nose really high but there is no water spray from sides at all and it's on the pad and its only thing touching. I have terrible torque steer!!!!! What did your hyperlift run?
I am going to talk to rh about it again but we needed a base line to go off of.
The video is on havocs Facebook page.
I dont see a video on Havoc's facebook page
I saw it.....
Sent from my SCH-I545 using Tapatalk
If anyone was wandering if santeeswamper's Havoc is legit???? I witnessed it today....IT'S STRAIGHT UP NASTY!!!!
Bookmarks