If my trolling motor says 24v then does that mean that I have to hook it up to 2 12 volt batteries to get it to work? Seems like a ton of power for a TM....
If my trolling motor says 24v then does that mean that I have to hook it up to 2 12 volt batteries to get it to work? Seems like a ton of power for a TM....
Jesco White is an American Hero.
In my limited knowledge of 'lectricity, (and I am like labhumper in that regards) I would say that the TM would run on the 12 volt, but draw the battery down super fast.
"Rivers and the inhabitants of the watery elements are for wise men to contemplate and for fools to pass by without consideration" -Izaak Walton
It means you use two 12V batteries wired in series to yield 24V
"The real reason fish jump - they don't have a middle finger!"
If you're wondering how to wire two batteries in series... First battery positive to the positive on the motor - then the negative on this battery to the positive on the second battery and the second battery negative to the negative on the motor.
This is referred to as a "series" connection and will double the output voltage of the batteries.
"The real reason fish jump - they don't have a middle finger!"
Don't question Boonie.
Ever.
I don't need my name in the marquee lights....
Word.
"Rivers and the inhabitants of the watery elements are for wise men to contemplate and for fools to pass by without consideration" -Izaak Walton
Good deal. Thanks for the help guys!
Jesco White is an American Hero.
Just out of curiosity, can I even run it as a 12V or will it a) not run at all or b) run with alot less power for less time?
Jesco White is an American Hero.
I dont know much, but a hard lesson learned:
Dont take short cuts.
"Rivers and the inhabitants of the watery elements are for wise men to contemplate and for fools to pass by without consideration" -Izaak Walton
It will likely not run on 12V.
All electric motors, whether AC or DC powered, will have a recommended range of voltage for reliable operation. I would be willing to say, with decent confidence, that under-voltage will be bad for the motor. I know that over-voltage will cause failure.
DC motor speed and/or torque is regulated by the voltage applied (remember the range of voltage that I was talking about earlier), so 12V will likely not power up the motor, but I'd be willing to bet that if you try and leave 12V to the motor, that you're going to burn something up.
AC motor technology is a totally different animal. If you get to talking about AC power, you can forget all you ever knew about DC power....
Last edited by turbo; 03-24-2010 at 02:32 PM.
Bookmarks