7mm08

[bitesize]

I'm pretty sure most people will say Talley. Do you have a pic rail or Weaver mounts?

I just got a set of these for an old Tikka 7mm Mag (M695) I'm "revamping" -- https://warnescopemounts.com/2tm-war...h-matte-rings/

Tikka has the integrated rail but I’m not sure how much faith to put in that- may mount a rail

[USMCsilver]

If it were me, I'd run the factory rail & see what's up. Why assume it's broke from the get-go?

I would remove it, degrease the screws, and reinstall with Loctite.

Or, if you want/need a 20MOA rail, then go for it.

[FLS]

Only the CTR and UPRs have factory pic rails. All other Tikkas have grooved receivers for Sako rings.
You have to add a rail or use a Sako style ring. Area 419 is the Cadillac of Tikka rails. If you’re not using that one, it doesn’t matter.

[FLS]

These are bombproof and will allow you to get the scope lower than a rail ring combo.

https://www.unknownmunitions.com/pro...m-tikka-rings/

[nitro5x6's]

I have a set of low Warne's on my CTR and it's perfect for the scope I have on it..

Really enjoying the CTR . It's a shooter.

[bitesize]

I have a set of low Warne's on my CTR and it's perfect for the scope I have on it..

Really enjoying the CTR . It's a shooter.

I went with the T3x Hunter- I’ve heard good things about Tikka, we shall see.

[FLS]

They’re about the best production rifle out there right now.

[StrutnBPS]

The trigger in my tikka is just as good as the timney in my Ruger. I have a dnz one piece mount on mine and have zero complaints. That’s a 44mm scope.

IMG_6942.jpg

[nitro5x6's]

Nice rifle BPS

[StrutnBPS]

Nice rifle BPS

Thanks. It’s a shooter.

[WoodieSC]

Tikka has the integrated rail but I’m not sure how much faith to put in that- may mount a rail

You may have already decided on this, but I've utilized the factory rail cut into the receiver on two Tikka rifles - an '06 and a .243 - with no issues at all. I used Warne/Tikka rings on both of them.