Results 1 to 9 of 9

Thread: Need some help with tractor/implement values

  1. #1
    Join Date
    Dec 2010
    Posts
    5,189

    Default Need some help with tractor/implement values

    Need help with values.
    2008 Case IH JX1075C cab tractor 75 hp, no def, with L720 loader. ac/heat, stereo with less than 700 hours.
    4 ranges 4 gears for 16 possible gears MFWD, shuttle shift. 2 remotes, draft control.
    A294F4F7-5644-4B28-99A7-99A7C4B8E9C4.jpg

    With Hardee MR1442 ditchbank cutter with 36 hours.
    C08A8B64-5EFC-4C37-BED6-1F6971A88032.jpg

    John Deere leveling disc about 13-1/2’ wide. With an extra set of new rims/tires.
    (Not actual one, but exactly like it minus new paint job)
    C5E45526-536A-4793-AFF2-0CDE328EF46B.jpg
    2BA7109A-5469-4E91-A79F-F713B76830CF.jpg

    Also have 6’ Hardee bush hog
    5’ box blade

    Just need a value to put on the whole lot.



    I came up with these values from the net.
    $38,000 for the tractor
    $10,000 for the ditch bank cutter
    $2,000 for the disc
    $1,000 for the bush hog
    $500 for the box blade.

    Am I even close?

    Thanks for the input.

  2. #2
    Join Date
    Nov 2013
    Location
    Florence, SC
    Posts
    2,575

    Default

    Seems high to me for tractor and hydraulic lift disk. I don’t know about the side cutter, but I wouldn’t pay $1000 for a used bush hog or $500 for a used box blade. You can find much better deals if you’ll look around. I might be the one that’s wrong, but I’d go spend some time at some auctions before I invested that much in that tractor and those implements, but with said, that’s a nice setup, but you may be overpricing it a tad
    Last edited by jevans; 08-01-2022 at 08:31 PM.

  3. #3
    Join Date
    Dec 2008
    Location
    Manning
    Posts
    2,176

    Default

    Used equipment in that size range are stupid expensive right now. Those prices are reasonable if the equipment is in good shape. I went to an auction recently to buy some implements equivalent to those and left with my tail tucked.

  4. #4
    Join Date
    Dec 2010
    Posts
    5,189

    Default

    Thanks. I tried to find comparable equipment and that’s what I came up with. I absolutely don’t know what the values should be.

  5. #5
    Join Date
    Aug 2013
    Location
    GreenHood
    Posts
    13,834

    Default

    I think you’re pretty close with the disc harrow, I’ve seen dad buy and sell slightly smaller ones for not much less.

    The bush hog and box blade I think would de very dependent on condition at that price but I’d keep the prices as is for starting out .

    New stuff is getting more expensive with each shipment that comes in and is driving used prices up
    Houndsmen are born, not made

    Quote Originally Posted by 2thDoc View Post
    I STAND WITH DUCK CUTTER!
    Quote Originally Posted by JABIII View Post
    I knew it wasn't real because no dogbox...

  6. #6
    Join Date
    Nov 2013
    Location
    Florence, SC
    Posts
    2,575

    Default

    I could be wrong. What I have seen lately though is implements that work off the lift (3pt hitch) are going for a lot of money, while a lot of the bigger implements are selling pretty cheap. Maybe things have just gotten that expensive anymore though.

  7. #7
    Join Date
    May 2003
    Location
    Bowman
    Posts
    6,421

    Default

    Very fair prices. Better get a scoop of dirt in the bucket and set the rims out wider if you intend to do much with that cutter. I ran that same model on a 6140d and you could feel it back there especially when you boomed it out
    cut\'em

  8. #8
    Join Date
    Mar 2006
    Location
    Diameter at Breast Height aka "DBH"
    Posts
    3,291

    Default

    Pics of 6' bush hog & condition?
    Quote Originally Posted by Ghetto View Post
    A larger caliber will help you with your deer kills. Try it.


    Quote Originally Posted by Sportin' Woodies View Post
    I agree with timber22

  9. #9
    Join Date
    Dec 2010
    Posts
    5,189

    Default

    Quote Originally Posted by Southernduck View Post
    Very fair prices. Better get a scoop of dirt in the bucket and set the rims out wider if you intend to do much with that cutter. I ran that same model on a 6140d and you could feel it back there especially when you boomed it out
    Those tires are ballasted. It doesn't move.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •