Reasonable priced utility Trailers

[everlast]

Tractor supply has gone a bit nuts with prices on these, IMO. Any recondition on where to find more reasonably-priced utility trailers around the midlands?

[SCWOODROW]

Bedenbaugh Trailers. He is in Gilbert. Budjie Bedenbaugh

[theoldblackdog]

JBs in the Ballentine area was good to me. I’ve got a 5x10 from them that is solid that I’m thinking about parting with to go a little bigger

[DRDUCK]

Everything is overpriced due to FJB policy's put in place.

[everlast]

JBs in the Ballentine area was good to me. I’ve got a 5x10 from them that is solid that I’m thinking about parting with to go a little bigger

If it's wood bottom and you do decide to part with it, please let me know. In the meanwhile, I'll check them out. Thanks

[TheVisorGuy]

What size

[everlast]

Bedenbaugh Trailers. He is in Gilbert. Budjie Bedenbaugh

Quick search All I could find was Bedenbaugh wholesale equipment in Leesville. Could that be the same people? If not do you have a phone number or a website by chance? I appreciate it

[theoldblackdog]

If it's wood bottom and you do decide to part with it, please let me know. In the meanwhile, I'll check them out. Thanks

It is definitely wood bottom and only a year or so old. The jack isn’t working due to bending the handle while pulling with a 4 wheeler but that’s an easy fix

[everlast]

What size

Need a couple eventually. 5x10 or so single axel for small work and 6x14 or so double axel for hauling tractor, lumber, etc. Looking for the smaller one at the moment but if there is a larger one available in price right.....

[Johnny Reb]

Tony’s RV on Pond Branch Rd used to have good prices and selection Pre-Covid. I haven’t been there in a while so not sure if that’s still true.


Sent from my iPhone using Tapatalk

[everlast]

It is definitely wood bottom and only a year or so old. The jack isn’t working due to bending the handle while pulling with a 4 wheeler but that’s an easy fix

If you definitely want to sell it please DM me some pictures if you wouldn't mind and what you're looking to sell it for

[Duck cutter]

Need a couple eventually. 5x10 or so single axel for small work and 6x14 or so double axel for hauling tractor, lumber, etc. Looking for the smaller one at the moment but if there is a larger one available in price right.....

Go bigger than 6x14 for your big trailer

[everlast]

Go bigger than 6x14 for your big trailer

What would you recommend? Now that you mention it 16 feet long would better for lumber length.

[Duck cutter]

What would you recommend? Now that you mention it 16 feet long would better for lumber length.

16’ minimum , my next one will be a 20
I have a 7x16 metal decked w, dovetail, removable fenders, winch and stow underneath ramps. It’s nice and done everything I’ve ever needed but it still gets cramped at times

[Smilee]

Ellenboro trailers is making some nice ones.

[TheVisorGuy]

https://scducks.com/forum/showthread...hlight=Trailer

[Whackumstackum]

I’ve got a 20ft long big Tex 14et and I would go 24ft if I had it to do over. A tractor and a disc fills it up.

[TheVisorGuy]

I had a 24 ft that got stolen. Had a young dude in McConnell's build me a 28ft. Definitely go long
C83E63C4-CDEC-4394-856F-6B9FFEEAE728.jpg
C83E63C4-CDEC-4394-856F-6B9FFEEAE728.jpg

[Remy]

Ain’t no such thing as a decently priced new trailer right now. Only chance you got of finding a good deal is buying from an individual

[SCWOODROW]

Quick search All I could find was Bedenbaugh wholesale equipment in Leesville. Could that be the same people? If not do you have a phone number or a website by chance? I appreciate it

That’s it. He sells tractor implements as well.