Inertia guns like the M2000 and the Benelli will shoot dirty but they don’t shoot well when they are dry. When the bolt cycling is sluggish, especially when it is cold means that it needs a thorough cleaning and a probably a new recoil spring. The inertia guns need to be run wet…..not slightly lubed but reasonably wet. I clean my rails with a Q-tip and lube it with CLP using another Q-tip. Take the stock off and carefully remove the recoil spring (lots of YouTube videos demonstrating this). To test the spring issue, remove the old one and stretch it. If it fixes the issue(which is likely) buy a new spring and replace it. Weak/rusty springs and lack of lube are probably the main culprits of poor functioning in the inertia guns.
Last edited by CWPINST; 10-23-2021 at 01:55 PM.
If it ain\'t accurate at long distance, then the fact that it is flat shooting is meaningless.
Bookmarks