Results 1 to 12 of 12

Thread: 93 gmc k1500 - interior trim

  1. #1
    Join Date
    Aug 2003
    Location
    Fountain Out
    Posts
    28,445

    Default 93 gmc k1500 - interior trim

    Need to source some interior trim pieces for my son's truck. Some of the tabs broke on removal even as careful as we were - just brittle from age.
    We know about LMC and 1A - not finding anything with either of those.
    Have not yet checked junkyards but aren't against it - just looking for new aftermarket first.
    What else you got?

    This stuff is ridiculously tough to find.
    I don't need my name in the marquee lights....

  2. #2
    Join Date
    Nov 2007
    Location
    Lexington, SC
    Posts
    14,522

    Default

    KRT of course

  3. #3
    Join Date
    Aug 2003
    Location
    Fountain Out
    Posts
    28,445

    Default

    Of course.
    I don't need my name in the marquee lights....

  4. #4
    Join Date
    Dec 2010
    Posts
    5,189

    Default

    Rockauto

  5. #5
    Join Date
    Aug 2003
    Location
    Fountain Out
    Posts
    28,445

    Default

    Thanks.....should have mentioned them too. They were in that LMC/1A group.
    I don't need my name in the marquee lights....

  6. #6
    Join Date
    Feb 2003
    Location
    united states of america
    Posts
    21,586

    Default

    Buying trim for your boy is nice but he needs to learn to get trim in his truck without dad.

  7. #7
    Join Date
    Aug 2003
    Location
    Fountain Out
    Posts
    28,445

    Default

    He hooks the boat up and drags it around town for that.
    I don't need my name in the marquee lights....

  8. #8
    Join Date
    Nov 2002
    Location
    Lexington
    Posts
    19,836

    Default

    88-98 OBS trend has taken off. The biggest thing is lowering them and or LS swap. I have had 12 at once,I’m down to 3 now. Finishing up a black one tomorrow with grey interior.

    Basically what I’m getting at is good luck. No one is doing aftermarket yet and anyone with good parts are getting a premium. I know where two immaculate red door panels are. He’s asking 300 for the pair. Red has been the hardest for me to get. I’ve got most of my interior parts off EBay and a group on Instagram.
    More fuel = more boost!!

  9. #9
    Join Date
    Dec 2002
    Location
    upstate, sc
    Posts
    3,286

    Default

    Son’s TRUCK? The son squirting water from the cooler on certain females at the Duck Run?? Dayam.
    \"We say grace and we say maam, if you ain\'t into that, we don\'t give a damn.\" HW Jr.

  10. #10
    Join Date
    Aug 2003
    Location
    Fountain Out
    Posts
    28,445

    Default

    Haha. That’s the one. We getting old.

    Thanks, Kevin. This is all gray interior so I imagine that’s pretty tough too. Can’t believe nobody is making this stuff. Seems like an opportunity but tooling would be a big hurdle.
    I don't need my name in the marquee lights....

  11. #11
    Join Date
    Nov 2002
    Location
    Lexington
    Posts
    19,836

    Default

    Yeah buying them and half ass restoring them to flip has become very difficult. Pre 88 model year has everything available almost.
    More fuel = more boost!!

  12. #12
    Join Date
    Dec 2010
    Posts
    28,022

    Default

    Been doing the same thing for this 69 Mustang.
    Drove to Clinton today and pulled two pieces off a donor car in the pouring rain.
    I have been getting most aftermarket but the piece I needed is not produced by anyone.
    They are out there, get on internet forums of the type vehicle and ebay

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •