Screw a light bar. I have had these two spreader lights under the workbench for awhile.
I found the time to mount and wire them up, took the grinder and went to work
making brackets, all stainless hardware bracket and soldered and heat shrunk the connections.
These lights pull almost no amps. I let them run on another boat I had for 9 hrs
on the cranking battery with the engine off and the motor started right up after 9 hrs.
They are bright as heck, wide and long beams due to both flood and spot Cree LEDs inside them.
Before
IMG_2645.jpg
After...….lit the whole dang neighborhood up
3.jpg
Mounted
IMG_2669.jpg
Bookmarks