i have a benelli m1 super 90 that is in very bad need of cleaning. i went to look for the instruction manual today and could not find it. can anyone here tell me where i can get one or tell me how to disassemble the gun?
thanks
Senior Member
i have a benelli m1 super 90 that is in very bad need of cleaning. i went to look for the instruction manual today and could not find it. can anyone here tell me where i can get one or tell me how to disassemble the gun?
thanks
"JUST BECAUSE I AM NOT A GOOD SPELLER DOESN'T MEAN MY JEAN POLL IS GONNA BE BAD."
Originally Posted by Mergie Master
Rush Chairman
I just got through taking mine apart and cleaning it. It is pretty easy..
http://www.scducks.com/ubb/cgi-bin/u...;f=22;t=001052
1. Remove barrel and foregrip
2. Pull bolt handle out away from the gun
3. Tilt gun forward and the bolt will fall out
4. On the back right of the bolt there is a round bolthead with a rubber o-ring pull (firing pin retainer) it out while keeping your fingers at the back of the bolt. This will release the firing pin and spring.
5. Pull the firing pin and spring out.
6. There is a little silver pin in the tip of the locking head on top of the bolt. This is the locking head pin. Pull it out.
7. This allows the locking head to be removed from the bolt.
8. Knock the pin out that holds your trigger assembly together.
10. Pull out your trigger assembly
Clean it all and put it back together. Pretty simple operation. You should have a total of 13 parts including stock, barrel, forearm, etc.
Here is a drawing but I don't remove the extractor and note that they left out the spring that your firing pin goes through...
Holler back if you need any help...
Senior Member
thanks jab. ill try it a little later this week and let you know how it goes...
"JUST BECAUSE I AM NOT A GOOD SPELLER DOESN'T MEAN MY JEAN POLL IS GONNA BE BAD."
Senior Member
Did you try the Benelli website?
Benelli manuals
168 grains of assistance from a distance
Be careful with JAB's step 4. It will launch if you are not careful. Clean thoroughly and lightly lube the rails with Breakfree. Use several Q-Tips for cleaning and a couple for lubing. Benelli's need a bit of lube but not too much!!! Also lube the rotating bolt body in the carrier....Just like an M16/15.
If it ain\'t accurate at long distance, then the fact that it is flat shooting is meaningless.
Dedicated Tamiecide Practitioner
Here's a site with tons of different gun manuals. Don't know if the one you're looking for is there, haven't checked:
Free Gun Manuals
The Elites don't fear the tall nails, government possesses both the will and the means to crush those folks. What the Elites do fear (or should fear) are the quiet men and women, with low profiles, hard hearts, long memories, and detailed target folders for action as they choose.
"I here repeat, & would willingly proclaim, my unmitigated hatred to Yankee rule—to all political, social and business connections with Yankees, & to the perfidious, malignant, & vile Yankee race."
Senior Member
the cleaning went off without a hitch, thanks guys
"JUST BECAUSE I AM NOT A GOOD SPELLER DOESN'T MEAN MY JEAN POLL IS GONNA BE BAD."
Posting Permissions
Reply With Quote
Bookmarks